RAS EasyFormer 12.35-3

EasyFormer Highlights

Automatic learning of movement sequences
Simple workshop-friendly operation, as no programming is required
Repeatable parts quality even with less trained staff
Large range of forming wheels for different applications
Large range of stop plates for different applications
Two speed ranges for sensitive and less critical jobs
Speed adjustable via the foot pedal depending on training level
Upper wheel adjustment in tenths of a millimeter increments
Left-right-runs for non-circulating seams
Accurate positioning for non-circulating seams
Sequences of frequently used components can be stored

Optimum clarity in the program management menu
Mechanical UnLock safety function opens the wheels instantly
Wheel boxes and wheel key

Categories: Formun, RAS, Vélar og Tæki Tag: RAS

Swaging Applications

Intelligent swaging machines with new Touch control

The EasyFormer swaging machines „learn“ from the operator how to swage and flange parts. In automatic mode the machine clones the taught sequence. The variable speed allows both: sensitive work with complicated parts or fast and productive runs with small series. The controller offers the best clarity and can be operated intuitively.

Intelligent control

The intelligent RAS EasyFormer-3 swaging machines with AutoTeach Function „learn“ from the operator how to swage and flange parts. This leads to repeatable parts of the highest quality.

Operating modes: Teach, Automatic, Manual
Manual: For one-time work
Teach: When running the first part of a production lot
Automatic: When applying the taught sequences for a series of parts

Practical functionality

The EasyFormer swaging machines can be operated via a touch panel control. The 2-axes control automatically learns and memorizes the movement sequences from the operator. Saving and loading of standard programs takes on a whole new meaning.

Storage and easy selection of up to 20 programs
Clear program management menu
If intended, the used wheels, the selected stop plate, the stop position and the pipe diameter can be stored
Dimension-related setting of the upper wheel with digital display
Continuous or progressive upper wheel adjustment achieves best forming results for thin and thick materials
Right-left-run
Wheels reach their turning point in forward/reverse operation with high accuracy
Soft speed-up and slow-down at start and at direction change
Two speed ranges for fast or sensitive work
mm/inch selection

Suitable stops

The high-strength and extra-large stop plate is designed for the highest demands. In addition, other stop plates are available.

The divided stop can be used for almost all wheels
Stop plate for insulating pipes (RAS 12.35-3 only)
Special stop plate for bevel flanging wheels BD
Round stop for internal flanges on blanks (RAS 12.35-3 only)

Setting made easy

A convenient hand lever allows positioning of the lower wheel, so that both wheels are precisely positioned over one other. A clamping mechanism assures that the shafts stay in position.

Sensitively lower shaft positioning
Positioning of the lower to the upper wheel shape
Central shaft adjustment with lever and scale

Unique UnLock safety function

If at risk, simply pull one of the UnLock levers left or right on the machine frame and the wheels open immediately.

Mechanical shaft unlocking in case of emergency
Quick release
Also effective in case of power failure due to overload
UnLock function meets the highest safety standards

Versatile operation

The multi-function foot switch can be configured. Thus, the machine follows the operation preferences of the worker. The foot switch can perform one of the following functions: