Upphengja OBMC
- Vörunúmer: ATOBMC
Tegund: OMBC
Nafn: Röraupphengja - Application
Used for suspension of circular ducts
Clamps OBMC are especially designed for vibration attenuation
Dia 80 up to 400 mm with screw M6 on either side, 1-point suspension with M8/M10 nut on top
Dia 450 up to 1000 mm with 2-point suspension with M10 hole on either side - Composition
Made of hot dipped sendzimir zinc plated steel
Maximum suspended weight: 500 kg
Width is 20 mm for Dia 80 – 400 mm and 25 mm above Dia 400 mm
Thickness is 1.8 mm under Dia 400 mm and 2.3 mm above Dia 400 mm
Rubber inlay:
Working temperature:
-40°C + 120°C
Material hardness: HS 60° +/-3° - Accessories
Threaded rods type THA (not included)
Other available products
Suspension clamps without rubber inlay type OBDC - Order example
OBMC, 250
Explanation :
OBMC = Clamp type
250 = Diameter of clamp - Text for tender
The circular ducts shall be suspended by means of sendzimir zinc plated steel clamps with rubber inlay. They shall tolerate a maximum suspended weight of 500 kg. The ducts shall be suspended on two points by means of threaded rods on either side of the clamp
ATC type OBMC
Upphengja OBMC
